Truck repair guides & industry insights
Find a starting point by engine, part, or problem. Explore repair guides, prepare your parts questions, and keep up with the business of trucking.
What are you working on?
Start with your engine family, then narrow the guides by system or symptom.
Choose an engine for available model-specific guides and related general overviews. Confirm your engine serial number, generation and truck application before applying repair advice.
Browse by part or system
Component overviews and maintenance guides, grouped around the job at hand.
Fuel delivery & injection
Low-pressure and high-pressure pumps, injectors, rails, control valves, filters and lines.
Turbo, intake & exhaust
Turbochargers, turbo actuators, charge-air plumbing, exhaust manifolds and bellows.
EGR systems
EGR valves, actuators, coolers, linkage, gaskets and related sensors.
DPF, DEF & SCR
DPF, DOC, SCR, DEF pumps, dosing, tanks and NOx / PM / temperature sensors.
Engine cooling
Water pumps, thermostats, fan clutches, reservoirs, pipes and cooling leaks.
Air supply, brakes & ABS
Compressors, air dryers, air valves, ABS, chambers and friction components.
More part categories
Transmission, clutch & PTO
Transmission controls, clutch and shift components, cooling and PTO.
Lubrication & crankcase
Oil pressure, pumps, filters, coolers, separators, pans and ventilation.
Engine controls & wiring
ECM, MCM, CPC and ACM identification, wiring and communication.
Starting & charging
Starters, alternators, batteries and their electrical connections.
Cab HVAC & heaters
A/C compressors, blowers, heater components and bunk heat.
Engine hard parts
Cylinder heads, gaskets, valvetrain and internal repair identification.
Steering & suspension
Power steering, steering gears, suspension and ride control.
Cab, visibility & body
Wiper systems, mirrors, lighting and cab components; match by chassis.
Part identification & buying
Part numbers, verified replacements, assembly contents and ordering.
Start with the problem
Find related guides. A symptom is a starting point for diagnosis and does not identify a replacement part by itself.
Repair guides to explore
MaxxForce DT No-Start and Injector Checks: EPA2007 Evidence
EPA2007 MaxxForce DT starting and injector evidence: distinguish pressure-system, connection and cylinder findings, with dated bulletin and serial scope before parts.
Find your next read
Search the published articles or browse a section. Engine mentions help you navigate; they do not establish part fitment.
Truck Losing Coolant or Overheating? Choose the Right Guide
Coolant loss or overheating: distinguish the warning, retain level/fill/test evidence, and choose among 21 published engine cooling guides.
Truck Won't Start? No-Crank or Crank-No-Start
Starting symptoms: no-crank, slow crank, hot/cold or after-sitting trouble; evidence record and links to 25 existing engine starting guides.
Internal Engine Parts: Serial, Measurements and Repair Scope
Internal and valvetrain parts: engine identity, repair history, measured size/grade, matched components and confirmed assembly contents.
Truck A/C Compressor: Checks Before Replacement
A/C compressor checks: cooling complaint, drive/control evidence, confirmed leak or pumping findings and exact assembly identity.
Heavy or Loose Steering: Checks Before a Steering Gear
Steering-gear decisions: exact complaint, external/mechanical findings, hydraulic evidence and installed assist configuration.
Power Steering Pump or System Fault? Evidence Before Parts
Steering-pump decisions: chassis identity, fluid-supply findings, measured output, actual leak source and confirmed repair.
PTO Selection: Transmission, Speed, Rotation and Mounting
PTO selection: installed transmission, driven-equipment requirements, speed and rotation, mounting and supplied assembly.
Transmission Cooler Leaks: Find the Source and Match the System
Transmission coolers: leak source, fluid-contamination evidence, installed cooling arrangement and confirmed assembly identity.
Clutch or Shift Actuator Fault? Evidence Before Replacement
Clutch and shift actuator decisions: installed generation, full faults, supply/harness findings and the supported repair.
Truck TCM Replacement: Transmission Identity and Programming
TCM replacement: transmission model and serial, module identity, configuration records and application-specific setup.
ABS Module or Circuit Fault? Checks Before Replacement
ABS module decisions: complete faults, power and network evidence, wheel-sensor findings and confirmed configuration.
Identify Truck Brake Drums, Rotors and Pads Before Ordering
Identify drum dimensions, rotor design and pad/caliper details before requesting replacement friction components.
Alternator or Charging Circuit? Tests Before Replacement
Alternator diagnosis: battery, belt, cable voltage loss, sensing configuration and matched output results.
Slow Cranking: Battery, Cables or Starter?
Slow crank: exact symptom, battery assessment, cable voltage loss, starter/engine findings and matched replacement identity.
Wiring Harnesses: Match the Circuit and Connectors
Wiring harnesses: installed assembly, branch endpoints, circuit assignment, connector keying and complete repair scope.
ACM Faults: Power, Network or Sensor Circuit?
ACM faults: battery supply, data-link and sensor-circuit evidence, exact application and the confirmed module decision.
CPC Replacement: Match the Vehicle and Configuration
Detroit CPC replacement: exact vehicle/module identity, fault context, configuration records and confirmed setup work.
Coolant Pipes and Connectors: Match the Complete Joint
Coolant pipes and connectors: installed endpoints, complete markings, mating connection, sealing and service scope.
Coolant Reservoirs: Level, Cap and Pressure Findings
Coolant reservoirs: comparable level records, cap versus system findings, tank/sensor identity and the confirmed repair.
Fan Clutches and Drives: Control Faults and Assembly Identity
Fan clutches and drives: control-path versus drive findings, full assembly identity, fan pilot and mounting interfaces.
Thermostat, Fan or Flow? Separate Cooling-System Findings
Thermostats: temperature evidence, fan operation, circulation and separate high/low-temperature diagnostic scope.
Engine Oil Filters: Match the System, Seals and Function
Oil filters: installed engine/housing, full-flow or bypass role, sealing interfaces and specified valve functions.
Oil at the Pan: Find the Leak Before Ordering Parts
Oil at the pan: migration, service history, exact leak location and confirmed pan/seal configuration.
Crankcase Ventilation: Oil Leaks, Carryover and Pressure
Crankcase ventilation: distinguish external leaks, carryover, measured pressure and maintenance; choose scoped engine and related oil guides.
Oil/Coolant Contamination: Tests Before an Oil Cooler
Oil/coolant contamination: affected fluid, distinct cooler/leak findings, repair scope and related engine or symptom guides.
DEF Lines: Match Connections, Heating and Routing
DEF lines: endpoints, fluid fittings, heating design, electrical connections and routing evidence.
DEF Tank Headers: Quality, Level and Assembly Identity
DEF tank/header parts: fluid versus signal findings, combined sensors, mounting, heating, connections and assembly identity.
Exhaust Temperature Sensors: Position, Type and Part Identity
Exhaust-temperature sensors: physical position, operating type, assembly markings, connections and fault evidence.
Particulate Sensor or DPF Pressure Sensor? Know the Difference
Particulate versus DPF-pressure sensors: measured parameter, sensor/line arrangement and confirmed repair scope.
NOx Sensors: What They Measure and What a Code Proves
NOx sensors: measured gas, code category, application-specific tests and the exact sensor position.
SCR Efficiency Faults: Checks Before Replacing the Catalyst
SCR efficiency faults: application, upstream faults, DEF delivery and sensor evidence before catalyst replacement.
Exhaust Bellows: Length, Ends and Connection Details
Exhaust bellows: assembly marking, free versus installed length, mating ends and connection details.
Diesel Fuel Lines and Fittings: What Must Match?
Diesel fuel lines and fittings: circuit, endpoints, assembly identity, connections, routing and repair scope.
Fuel-Water Separator Parts: Bowl, Drain, Sensor and Heater
Fuel-water separator service parts: assembly marking, bowl, drain, water sensor, heater and ports.
Diesel Fuel Rails: Connections, Sensors and Replacement Scope
Diesel fuel rails: complete identity, ports, mounting, sensor/valve configuration and repair scope.
Ford 6.7 Power Stroke Oil Service: Capacity, Specification and Duty
Ford 6.7 oil service: scoped F-650/750 capacity, Ford specification and duty-based schedule.
Ford 6.7 Power Stroke Regeneration and Derate: Evidence First
Ford 6.7 regeneration and derate: DPF versus SCR messages, duty history and confirmed findings.
Ford 6.7 Power Stroke Turbo Control: Evidence Before Parts
Ford 6.7 turbo control: exact application, complete codes and confirmed repair scope.
Ford 6.7 Power Stroke Cranks, No Start: Evidence Before Parts
Ford 6.7 starting: full codes, electrical findings, tank configuration and fuel evidence.
Ford 6.7 Power Stroke Coolant Loss: Evidence Before Parts
Commercial Ford 6.7 coolant loss: circuit, localized leak and separate gauge evidence.
Ford 6.7 Power Stroke Parts: Truck, Build and Engine Identity
Commercial Ford 6.7 identification: truck series, VIN, engine build and actual assembly.
Mack MP7/MP8 Cranks but Will Not Start: Common-Rail Evidence
MP7/MP8 no-start: installed fuel system, complete codes and scoped common-rail findings.
Mack MP7/MP8 Coolant Loss: Leak Origins and Test Evidence
MP7/MP8 coolant loss: matched cooler tests, localized findings and MP8-only leak cases.
Volvo D16 Cranks but Will Not Start: D16F Fuel Evidence
D16 no-start: D16F fuel system, test record and repair findings.
Volvo D16 Parts Identification: Generation and Replacement History
D16 identification: engine record, generation and replacement history.
Volvo & Mack Oil Service: Pan, Filters and Specifications
D11/D13/D16 and MP7/MP8 oil service: matched pan, filters, approval and service row.
Volvo D11 Parts Identification: Generation, Build and Engine Record
Volvo D11 identification: VIN and installed engine/serial record, dated F/H/J/M examples, VAH/VHD build details and a checked component request.
Volvo & Mack Turbo Control: Evidence Before Parts
D11/D13/D16 and MP7/MP8 turbo control: matched tests, electrical findings and setup.
Volvo & Mack Regeneration or Derate: Evidence Before Parts
D11/D13/D16 and MP7/MP8 regen/derate: emissions, warning, event and code evidence.
Volvo D11/D13/D16 Coolant Loss: Test Scope and Leak Evidence
D11/D13/D16 coolant loss: matched tests, circuits and leak findings.
Volvo D11/D13 Cranks but Will Not Start: Fuel-Pressure Evidence
Volvo D11/D13 starting evidence: match the installed fuel system, distinguish supply and rail findings, and retain dated ePRV and chassis-specific limits.
Cat C9 Coolant Loss: Level Warnings and Leak Evidence
C9 coolant-loss evidence: comparable level checks, warning/circuit distinctions, localized leakage and pump-drain observations before cooling parts.
Cat C9 Turbo Identification: Mounting and Parts Requests
C9 turbo selection: full engine serial, installed nameplate, mounting and control photos, diagnostic evidence and confirmed assembly contents.
Cat C9 Injector and Fuel-Control Tests Before Parts
C9 injector selection: electrical, cylinder, supply and pressure findings, separate HEUI/C9S scope and confirmed repair setup before parts.
Cat C9 Oil Pressure: Warning, Sensor and Gauge Checks
C9 oil-pressure evidence: complete warning, voltage-fault distinctions, source-labeled readings, matched gauge comparison and confirmed repair scope.
MaxxForce DT No-Start and Injector Checks: EPA2007 Evidence
EPA2007 MaxxForce DT starting and injector evidence: distinguish pressure-system, connection and cylinder findings, with dated bulletin and serial scope before parts.
Cat C9 Cranks but Will Not Start: Identify the Fuel System
C9 identity and no-start triage: full serial, dated HEUI/common-rail distinctions, scan data and confirmed repair findings before parts.
Cat C7 Coolant Loss and Overheating: Warning Checks
C7 cooling evidence: measured loss, actual level, high-temperature events and signal faults, with dated application scope and confirmed repair findings.
Cat C7 Engine and Turbo Identification Before Parts
C7 engine and turbo identity: full serial, vehicle application, complete turbo nameplate, publication-prefix scope and confirmed replacement package.
Cat C7 Oil Capacity: Sump, Filter and Final-Level Checks
C7 oil-capacity evidence: dated WAX with/without-filter refill figures, separate C7S calibration context, sump identification and final recorded level.
Cat C7 Hot No-Start: Injector and Actuation Checks
C7 hot-restart evidence: failed-attempt conditions, cranking, fuel, oil and injection-actuation findings before an injector or HEUI parts request.
CAT 3406E Coolant Loss: Level, Warning and Leak Checks
3406E coolant-loss evidence: measured additions, actual level versus warning, cap and leak findings, confirmed component and post-repair verification.
Lost Communication: ECM, Power or Wiring?
Lost communication: retain engine/tool/module-visibility records, distinguish power and network findings, then choose scoped engine or controller guides.
CAT 3406E Misfire: Checks Before Replacing Injectors
3406E running-miss evidence: operating conditions, cylinder-test findings, fuel and electrical assessment, confirmed repair scope and post-repair verification.
CAT 3406E Oil Capacity: Sump, BrakeSaver and Level Checks
3406E oil-fill evidence: standard and BrakeSaver sump examples, optional filtration, calibrated level and the final recorded service quantity.
CAT 3406E Parts Identification: Serial and Arrangement
3406E parts identification: full engine serial and arrangement, installed assembly, replacement history and supplier-confirmed application; dated covers do not prove interchange.
CAT 3406E Hard Starting: Fuel-Prime Checks Before Parts
3406E starting evidence: filter service versus running dry, optional priming hardware, separator findings and a confirmed component before ordering.
CAT C12 Parts Identification: Serial, ECM and Harness
C12 parts identification: full serial and arrangement, installed ECM or harness labels, confirmed electrical findings and setup scope, with dated prefix limits.
CAT C12 Turbo Replacement: Air-Path and Inspection Checks
C12 turbo-replacement evidence: low-power conditions, tested air-path findings, turbo inspection and installed assembly identity before ordering.
CAT C12 Coolant Loss: Level, Warning and Leak Checks
C12 coolant-loss evidence: warning versus actual level, measured additions, leak and signal findings, service history and confirmed repair scope.
CAT C12 Oil Capacity: Gauge, Sump and Filter Checks
C12 oil-service evidence: dated calibration example, installed sump and filters, gauge verification and the final measured service quantity.
CAT C12 Hard Starting or Losing Prime: Checks Before Parts
C12 hard-start and prime-loss evidence: parking conditions, fuel/filter service event, priming hardware and tested fuel or electrical findings.
CAT C13 Rough Running: KCB Checks Before Injector Replacement
C13 KCB rough-running evidence: operating conditions, cylinder isolation and follow-up, circuit and fuel findings before injector selection.
CAT C13 Will Not Start: KCB No-Crank and Crank-No-Start Checks
C13 KCB starting evidence: no-crank versus crank-no-start, tested circuit and engine findings, service history and safe application-specific next steps.
CAT C13 Coolant Loss: Leaks, Level and Fill-History Checks
C13 coolant-loss evidence: documented additions, actual level and refill history, scoped LEE/S3C engine checks and a separate Van Hool KCB coach example.
CAT C13 Low Oil Pressure: KCB Sensor and Gauge Checks
C13 KCB low-oil-pressure evidence: warning and voltage-code distinctions, matched gauge/service-tool findings, oil history and confirmed component identity.
CAT C13 Identification: Serial Prefix and Turbo Arrangement
C13 identification and turbo ordering: full serial and arrangement, scoped emissions examples, mounting details and the dated LEE accessory-change case.
CAT C15 Oil Capacity: Match the Prefix, Sump and Filters
C15 oil capacity: dated BXS/MXS and SDP/B5R on-highway examples, sump and standard/auxiliary filters, with current application and level verification.
CAT C15 BXS Acceleration: Turbo and Intake-Control Checks
C15 BXS acceleration, turbo and intake-control evidence: separate air-path findings from valve-actuation faults before selecting replacement parts.
MaxxForce DT Wiring or ECM Fault? Power and Data-Link Checks
MaxxForce DT wiring and ECM evidence: supply and ground findings, service-tool/data-link checks, complete codes and separately scoped calibration history.
MaxxForce DT Coolant Loss: EPA2010 Cooler and Leak Checks
EPA2010 MaxxForce DT coolant-loss evidence: preliminary leaks, scoped cooler assessment, a WorkStar feature-specific hose example and starting-change history.
MaxxForce DT EGR Faults: Codes and Diagnostic Information
MaxxForce DT EGR fault record: full SPN/FMI and status, event conditions, separate valve/circuit/flow findings and verified component application.
Truck Turbo Selection: DT466, DD16 and Series 60
Turbo selection and installation parts: exact identity, package contents and scoped DT466/DD16/Series 60 examples.
MaxxForce 11/13 Coolant Loss and Oil in Coolant
2010-emissions MaxxForce 11/13 coolant-loss checks plus a separately scoped MaxxForce 13 oil-in-coolant branch, affected-circuit cleanup and parts-request records.
MaxxForce 11/13 Starting: No-Start and Cold-Start Checks
MaxxForce 11/13 starting evidence: chassis/transmission-specific no-crank checks, EPA2010 rail-pressure complaint, cold-start assist and scoped monitor examples.
DEF Supply and Dosing Faults: Winter Checks Before Parts
Winter DEF and supply/dosing faults: actual application, circuit evidence, filter location and confirmed repair scope.
MaxxForce 11/13 Boost: Turbo and Air-Control Checks
MaxxForce 11/13 boost and ordering evidence: installed turbo stage, scoped ACV venting, exhaust-pressure faults, limited connector history and actual component identity.
MaxxForce 11/13 Parts Identification: Serial and Build
MaxxForce 11/13 parts identity: full engine/component record plus separately scoped 2007 and 2010 EGR valve, wiring-history and cooler-repair examples.
Cummins N14 Oil Capacity and Parts Identification
N14 oil capacity: dated service example versus total system, installed pan/filter/gauge checks, ESN, CPL and control records for parts identification.
Cummins N14 Hard Starting or Losing Prime: What to Check
N14 starting and controls: matched fuel system, ECM power/circuit findings and historical service-tool communication-path distinctions.
Cummins N14 Rough Running: Evidence Before Buying Injectors
N14 rough-running and injector evidence: matched CELECT diagnostic example, cylinder findings, repair scope and limited historical T1892 field-action conditions.
Cummins N14 Coolant Loss and Overheating: Evidence Before Parts
N14 cooling concerns: loss/temperature history, external leak evidence, valid air versus combustion findings and the matched fan/control arrangement.
Cummins M11 or ISM Parts: Identify the Engine and Application
M11/ISM identity: installed ESN, generation and component records, dated kit scope, as-built controls and separately scoped turbo/actuator arrangements.
Cummins ISM/M11 Starting and Fuel Checks Before Buying Parts
ISM/M11 starting and fuel evidence: matched system, cranking/smoke pattern, supply versus circuit findings and pump/injector evidence, with dated manufacturer examples.
Cummins ISM/M11 Low Oil Pressure: What to Verify Before Parts
ISM/M11 oil-pressure concerns: warning conditions, indication versus lubrication evidence, matched reference check and control-specific sensor identity.
Cummins ISM Coolant Loss: Leak Evidence and Parts Checks
ISM coolant-loss evidence: additions and level-check history, external/internal findings, separately scoped CM870/CM876 cooling plumbing and diagnosed component.
Cummins ISB 6.7 Oil Capacity: Truck, Pickup and Pan Differences
ISB6.7 oil/application identification: scoped EPA2010 truck and 2024 Ram pickup capacity labels, actual oil-pan option and matched service-fill information.
Cummins ISB 6.7 Cranks but Will Not Start: Checks Before Parts
ISB 6.7 starting evidence: installed controls, recent service and separately scoped OEM fuel-air, fuel-line and intake-heater examples.
Cummins ISB 6.7 Turbo Actuator: Checks Before Replacement
ISB 6.7 VGT actuator evidence: diagnostic findings, installation/calibration result and matched 12-volt service-kit application.
Cummins ISB 6.7 EGR and Coolant Loss: Checks Before a Cooler
ISB 6.7 coolant-loss evidence: external EGR plumbing, matched internal-cooler testing and separately scoped post-service fill/level concerns.
Cummins ISB 6.7 Aftertreatment Parts: ESN, ATSN and Emissions
ISB 6.7 aftertreatment identity: engine and chassis/emissions record, ATSN, complete assembly markings and diagnosed component or sensor position.
Cummins ISL/L9 Parts Identification: Controls and Application
ISL/L9 identity and turbo ordering: installed engine/controls, actual replacement-turbo record, scoped campaign eligibility and actuator setup evidence.
Cummins ISL/L9 Hard Starting or Losing Prime: What to Check
ISL/L9 starting evidence: remote-filter line scope, matched lift-pump and filter-service information, and separately scoped OEM starter-control behavior.
Cummins ISL/L9 Coolant Loss: Leak Tests and Level Signals
ISL/L9 coolant-loss evidence: scoped OEM heat-exchanger plumbing, matched EGR-cooler test method and separately verified physical level/signal concerns.
Cummins ISL/L9 Oil Pressure: Verify the Reading Before Parts
ISL/L9 oil-pressure evidence: warning and operating conditions, matched pressure verification, actual switch leakage and application-specific input wiring.
Cummins ISL/L9 EGR Faults: Wiring, Sensors or Valve?
ISL/L9 EGR evidence: separately scoped temperature-connector, pressure-sensor installation and cold-event findings before choosing a repair item.
PACCAR MX-11 Identification: Generation and Parts Fitment
MX-11 parts identity: installed engine and complete label, conflicting-record checks, actual component markings and a verified application.
PACCAR MX-11 Derate: Information Needed Before Parts
MX-11 derate record: exact warnings, complete fault report, engine identity and installed software; separately scoped older EAS and August 2026 DEF-update examples.
PACCAR MX-11 Cranks but Won't Start: Evidence Before Parts
MX-11 starting evidence: actual complaint, scoped fuel-filter installation, matched post-service priming and diagnostic findings before parts.
PACCAR MX-11 Coolant Loss: Connections Before an EGR Cooler
MX-11 coolant-loss evidence: comparable cold levels, scoped cooler-supply-pipe and Kenworth composite-fitting examples, and a confirmed leak path.
PACCAR MX-11 Low Boost: Charge-Air Leak or Control Problem?
MX-11 low-boost evidence: charge-air path findings, separately scoped actuator/control testing, and the confirmed repair item.
PACCAR MX-11 Oil Pressure: Verify Conditions and Input
MX-11 oil-pressure evidence: warning response, operating conditions, actual pressure verification and separately scoped EPA2024 switch test tooling.
MaxxForce 11/13 Oil Pressure: Checks Before a Sensor
MaxxForce 11/13 oil-pressure evidence: warning response, operating conditions, a scoped 2007 connection case, separate 2010 sensor layout and verified findings.
International A26 Parts Identification: Serial, Build and VIN
A26 parts identity: installed engine, full serial/build record, VIN, electronic identity and actual component matched before a replacement quote.
International A26 Coolant Loss and Overheating: Evidence First
A26 cooling evidence: separate coolant loss, level warnings and temperature events; preserve LT-chassis connection scope, fan configuration and verified findings.
International A26 Derate: Codes and Conditions Before Parts
A26 derate evidence: complete SPN/FMI and actual restrictions, engine protection, historical SCR/QLS context and precisely scoped cold-weather findings.
International A26 Cranks but Will Not Start: Checks Before Parts
A26 no-start evidence: exact behavior, serial-scoped 2017 supplemental fuel information, full fault reports, post-service/cold conditions and confirmed test findings.
International A26 Low Boost: Checks Before Turbo Replacement
A26 low-boost evidence: actual complaint, LT charge-air hose findings, separate 2017/2021 serial-scoped airflow branches and confirmed repair scope.
International A26 Oil Pressure: Checks Before a Sensor
A26 oil-pressure evidence: warning response, exact operating conditions, limited 2017 LT/RH gauge behavior and matched pressure/signal findings before parts.
DT466E ICP Sensor Location and Starting Checks
DT466E ICP location: separate EGES-210-1 left-view/manifold reference, installed-engine checks and retained 2001 starting, pressure and injector evidence.
DT466 Oil Capacity: Mechanical and DT466E Application Checks
Mechanical DT466 and DT466E oil service: separate historical vehicle and electronic serial examples, installed filter, refill basis and final-level confirmation.
DT466E Oil in Coolant or Coolant in Oil: Find the Leak Path
DT466E oil/coolant contamination: identify the affected fluid, preserve cooler findings and other leak paths, then confirm the repair and cleanup record.
DT466, DT466E and MaxxForce DT: Engine Identification
DT466, DT466E and MaxxForce DT identity: mechanical versus electronic systems, separate MaxxForce DT build/control records and confirmed component application.
Mechanical DT466 Starting and Injection Pump: Bosch MW Example
Mechanical DT466 starting and pump evidence: scoped DT-466C/Bosch MW fuel path, actual parked-start pattern, service history and confirmed pump findings.
Truck Parts Fitment: DD15 and DD16 Examples Before You Buy
Parts fitment before buying: scoped DD15/DD16 serial and hardware examples, complete identifiers and confirmed replacement or conversion contents.
Low Boost, Charge-Air Leaks or Turbo Failure? DD13 Examples
Low boost: charge-air plumbing and leak reports, control faults and scoped DD13 turbo examples.
Semi-Truck Air Compressor: Identification & Replacement Planning
Identify the installed air-brake compressor, prepare a fitment request and plan replacement with a qualified service provider.
Diesel Fuel Pressure Problems: Supply, Pump, Valve or Sensor?
Diesel fuel pressure: separate supply, sensor, control-valve and pump evidence; scoped DD16 examples.
Low Oil Pressure: Sensor, Wiring or Pump? Engine Checks
Oil pressure: separate C15 6NZ, X15 and ISX15 sensor references, retained DD16 examples, reading evidence and nine engine-guide destinations.
Which Semi-Truck Engine Is Best? Cummins, PACCAR, Volvo, Mack or Detroit
Compare Cummins, PACCAR, Volvo, Mack and Detroit by exact engine generation, duty cycle, maintenance, service support and ownership costs.
EGR Cooler Leak or Another Coolant-Loss Cause? Evidence Before Parts
Evidence for an EGR-cooler leak, including scoped DD16 coolant-loss and overheating checks, competing paths, test quality and exact-assembly fitment.
EGR Fault: Valve, Actuator, Sensor or Wiring?
EGR faults: ISX15 CM2350 valve reference, complete code/condition records, separate sensing and hardware findings, plus scoped engine-guide links.
Frequent Regen or Derate? DPF Service Evidence Before Parts
Frequent regeneration or derate: retain codes, warnings and event history; choose seven scoped engine guides and separate DPF cleaning from replacement.
Slow Air Build: X15 Location and Series 60 Checks
Slow air build: X15 CM2350 compressor-view reference, installed-part identity and separate charging, dryer, leakage and compressor evidence.
DD15 EGR Valve or Actuator? Symptoms, Checks and Part Fitment
DD15 EGR valve, actuator, linkage and electrical problems; fault-code examples and part-fitment checks.
DD15 Oil-Pressure Sensor Location: Sensor Fault or Low Pressure?
DD15 oil-pressure sensor location, low-pressure warnings and Gen 5 dashboard-gauge behavior.
DD15 Crankcase Breather Symptoms: Oil Leaks, Pressure and Checks
DD15 crankcase-breather symptoms, oil leaks, separator-speed faults and evidence to gather before ordering.
DD15 Losing Coolant with No Visible Leak: What to Check
DD15 coolant loss without a visible leak: level history, diagnostic paths, Gen 5 examples and cooler-fitment checks.
DD15 No Start After a Fuel-Filter Change: Checks Before Parts
DD15 cranks but will not start after fuel-filter service: filter-system identity, service checks and priming distinctions.
DD15 Frequent Regen or Derate: What to Check Before Parts
DD15 frequent regeneration and derate: event history, soot versus ash, generation-specific pressure checks and DEF/SCR distinctions.
Truck Parts RFQ: Verify Alternate Numbers and Kit Contents
Printable truck-parts RFQ: verify alternate and superseded numbers, confirm assembly or kit contents, and retain supplier and delivery answers.
Remanufactured Truck Parts: A Core Return Checklist for Buyers
Organize a remanufactured-part core return and confirm the order-specific terms.
PACCAR MX-13 Oil Capacity: Quarts, Liters and the Level Check
PACCAR MX-13 oil capacity, service quantity versus top-up, correct level-check conditions and oil/filter service planning.
CAT C15 Identification: Serial Prefix, ACERT and Parts Fitment
C15 identification before ordering: selected Cat serial-prefix and ACERT examples, complete engine identity and component fitment.
Cummins X15 Oil Capacity: Match the Pan and Service Quantity
Cummins X15 oil-capacity examples: identify the installed pan, distinguish oil-change and total-system quantities, and verify the final level.
Cummins ISX Fuel Systems and No-Start Checks Before Parts
Identify the installed ISX fuel system with scoped generation examples, then use starting history and diagnostic evidence before choosing parts.
PACCAR MX-13 Wonโt Regen or Is Derated: What to Check
MX-13 regeneration and derate: distinguish the warning, check matching operator prerequisites and record interrupted events before parts.
Volvo D13 Parts Identification: VIN, Engine and Generation
Volvo D13 parts identification: VIN, installed engine, emissions/build scope, component revisions and consistent service records.
Mack MP7/MP8 Parts Identification: VIN, Engine and Configuration
MP7/MP8 identification: VIN, installed serial, labels, intake and assembly configuration.
DD13 Oil Capacity: Truck, Coach and Service-Fill Checks
DD13 oil capacity: compare truck and coach service fills, distinguish pan and dry quantities, and verify the actual oil level.
DD13 Coolant Loss: Leak Checks and the EGR Cooler Test
DD13 coolant loss: separate leak and contamination findings, understand the scoped GHG17 cooler/water-manifold test, and verify the diagnosed part.
DD13 EGR Faults: Valve, Actuator, Linkage or Wiring?
DD13 EGR faults: separate GHG14 communication and movement findings, and check actuator conversion history before ordering.
DD13 Losing Prime or Cranking Without Starting: What to Check
DD13 losing prime or cranking without starting: identify the system, record the recurring pattern and use scoped leak, aeration and isolation evidence.
DD13 Parts Identification: Engine Serial, Generation and Fitment
DD13 parts identification: complete engine model/serial, generation and application, installed component details and consistent fitment records.
Series 60 Identification: Displacement, DDEC and Emissions
Series 60 identification: installed model/serial, scoped displacement and DDEC examples, certification records and actual emissions equipment.
Series 60 Losing Prime or Hard to Start: Evidence Before Parts
Series 60 hard starting: record the pattern, identify the filter system, interpret scoped Fuel Pro observations and confirm the failed component.
Series 60 Oil-Pressure Changes: Readings, Warnings and Checks
Series 60 oil-pressure changes: scoped operator minimums, speed and temperature, indication versus actual pressure and evidence before parts.
Series 60 Coolant Loss: Leak Evidence Before Replacing Parts
Series 60 coolant loss: consistent level history, water-pump residue versus active leakage, scoped temperature causes and diagnosed-part fitment.
Cummins ISX: Turbo Actuator, Turbo Damage or Boost Leak?
Separate ISX air-path leaks, actuator findings, turbo damage and setup questions, with scoped CM871 and historical CM2350 examples.
Cummins ISX Coolant Loss: Checks Before an EGR Cooler
Investigate ISX coolant loss before an EGR cooler: external-leak evidence, CM2250 troubleshooting and scoped turbo-contamination examples.
Cummins X15 Crankcase Breather: Maintenance or Diagnosis?
X15 crankcase breather: scoped maintenance-free examples, symptoms needing diagnosis and the identifiers to confirm before ordering.
Cummins X15 Frequent Regen or Derate: Evidence Before Parts
Separate X15 regeneration and derate warnings, soot versus ash, and scoped permit-switch or engine-side findings before choosing parts.
Cummins X15 Turbo or Actuator: Fitment and Setup Checks
X15 turbo and actuator selection: exact component/application, scoped installation and software findings, current kit contents and verified setup.
PACCAR MX-13 Crankcase Filter: Maintenance or Module Repair?
MX-13 crankcase filter: installed system and service history, scoped P1407 filter-versus-module guidance, and evidence before buying.
PACCAR MX-13 EGR Faults: Valve, Sensor or Another Cause?
MX-13 EGR faults: separate EPA2013 sensor/freezing and MY2017-2018 wet-soot examples, then verify the actual repair item.
PACCAR MX-13 Cranks but Won't Start: Fuel Checks Before Parts
MX-13 crank-no-start and fuel-pressure complaints: filter-service history, installed system, scoped low-side diagnostics and evidence before parts.
PACCAR MX-13 Coolant Loss: Checks Before an EGR Cooler
MX-13 coolant loss: consistent level records, scoped pump-seepage and EGR-venturi examples, and a verified leak path before cooler replacement.
Fall Prep for Truckers: How to Prevent Diesel Fuel Gelling Before Winter Hits
Cold-weather fuel preparation and fuel-filter maintenance topics.
Air Dryer Purging and Moisture: Diagnosis and Winter Prep
Air dryers: frequent purge versus continuous leakage, reservoir moisture, winter preparation and application-specific service.
Powering Through the Cold: Essential Battery and Starter Maintenance for Heavy-Duty Trucks
Battery, starter and connection checks for cold-weather preparation.
Cab or Bunk Heater Not Heating? Evidence Before Parts
Cab or bunk heater no-heat evidence: installed heater/control identity, power and fault records, airflow and separate cold-weather engine-fuel findings.
Wipers, Washers or Defrost? Truck Visibility Checks
Truck visibility checks: glass/blade condition, washer delivery, defrost mode and airflow, circuit findings and exact component identity.
Truck Suspension Inspection: Identify Parts Before Ordering
Suspension inspection and parts: chassis/system identity, axle position, scoped condition findings and confirmed service assembly.
Preparing Your Fleet for Fall & Winter: Essential Heavy-Duty Maintenance Steps
A seasonal maintenance overview for the truck and its major systems.
Air-Brake Systems: Valve Faults and Chamber Identification
Air brakes: valve-circuit identity, exhaust backfeed evidence, brake/chamber markings, stroke category and complete repair scope.
Diesel Hard Starting After Fuel-Filter Service: What to Check
Post-filter-service hard starting: exact work, filter identity, matched priming and diagnostic evidence.
Strategic Fleet Maintenance: Balancing OEM Quality with Operational Budgets
Buying, fleet operations and industry context.
Truck Losing Power Under Load? Choose the Right Diagnostic Path
Low power under load: separate boost, fuel and derate evidence; choose among 23 published diagnostic or identification guides before parts.
Ordering Heavy-Duty Parts: 5 Steps to Prevent Shipping Delays
Buying, fleet operations and industry context.
Turbo Actuator Replacement: Identity, Diagnosis and Setup
Turbo actuators: installed identity, electrical and mechanical findings, serviceability and matched setup.
3 Summer Breakdown Risks You Can Avoid with Reliable OEM Replacements
Seasonal checks for several common truck systems.
Listen to Your Truck: Diagnosing Issues Before the Check Engine Light
A general overview of changes in sound, performance and operating behavior.
OEM, Reman or Aftermarket? Compare the Complete Repair
Compare OEM, reman and aftermarket offers: application, actual condition, included parts, warranty, core terms and documented repair cost.
Turbocharger Health: 3 Critical Factors to Prevent Premature Failure
Turbocharger maintenance topics, including examples of common engine applications.
Predictive Maintenance: How Smart Sensors Are Saving Fleets from Record-High Downtime Costs
An introduction to sensors and maintenance planning.
EPA 2027 Is Coming: Is Your Fleet Ready?
Dated industry coverage. Check the article date and current official guidance.
Truck Blower Motor, Resistor or Wiring? Checks Before Parts
Blower motor or controls: airflow versus missing speeds, resistor or PWM design, circuit evidence and complete replacement identity.
Fuel Efficiency: Small Parts That Save Big at the Pump
Maintenance topics related to fuel use and everyday operating costs.
Maximum Cooling: Essential Summer Maintenance for Heavy-Duty Engines
Seasonal cooling-system maintenance and inspection topics.
CVSA Roadcheck 2026: Donโt Let a 72-Hour Blitz Stop Your Fleet
Dated industry coverage. Check the article date and current official guidance.
The top 10 major components on a diesel engine.
A starting point for understanding major diesel-engine components.
Cylinder Head or Gasket? Evidence Before a Repair Decision
Cylinder-head decisions: original complaint, confirmed failure, head/block findings, gasket identity and complete repair scope.
Diesel Rough Running or Smoke? Checks Before Injectors
Rough running and smoke: retain conditions and codes, distinguish circuit/fuel/cylinder findings, and choose scoped engine guides before injectors.
Water-Pump Faults: Leak, Drive and Flow Evidence
Water pumps: residue versus active leakage, drive findings, flow evidence and the confirmed installed assembly.
Exhaust-Manifold Leaks: Locate the Joint Before Parts
Exhaust-manifold complaints: exact joint, leak evidence, fluid interpretation and confirmed repair scope.
Why it's important to purchase genuine parts ?
Considerations when comparing genuine parts and replacement options.
The importance of e-commerce sites during a parts shortage
Dated industry coverage. Check the article date and current official guidance.
How to avoid getting scammed when buying online?
Buying, fleet operations and industry context.
WHAT DOES THE WATER PUMP DO?
What the engine water pump does and why coolant circulation matters.
3 TAKEAWAYS FROM THE CURRENT PARTS SHORTAGE
Dated industry coverage. Check the article date and current official guidance.
Why you shouldn't delete your emissions system?
An overview of emissions systems and the reasons to maintain them.
No matching guide found
Try a shorter phrase or clear the filters. For help identifying a replacement part, send the engine and truck details with the part number or photos.
Get fitment helpKeep the truck earning
Buying, ordering and maintenance planning for shops, fleets and owner-operators.
- Truck Parts RFQ Template: A Printable Worksheet for Fleet Buyers
- Remanufactured Truck Parts: A Core Return Checklist for Buyers
- Strategic Fleet Maintenance: Balancing OEM Quality with Operational Budgets
- Ordering Heavy-Duty Parts: 5 Steps to Prevent Shipping Delays
- How to avoid getting scammed when buying online?
Industry coverage & the archive
Dated stories on policy, events and parts supply. Check current official guidance for requirements that may have changed.
- Navigating DEF Freeze: How to Prevent SCR System Failures in Sub-Zero Weather
- EPA 2027 Is Coming: Is Your Fleet Ready?
- CVSA Roadcheck 2026: Donโt Let a 72-Hour Blitz Stop Your Fleet
- The importance of e-commerce sites during a parts shortage
- 3 TAKEAWAYS FROM THE CURRENT PARTS SHORTAGE
Need help matching the part?
Send your engine serial number, truck details, and the part number or clear photos. Confirm the exact application and what is included in the assembly or kit.
