Skip to content
| M-F 9AM - 7:30PM EST | SAME-DAY SHIPPING | +1 (877) 795-0656 |
| M-F 9AM - 7:30PM EST | +1 (877) 795-0656 | LIVE CHAT |

How to replace an EGR valve ?

Replacing an EGR (Exhaust Gas Recirculation) valve on diesel engines like Cummins, Paccar, Detroit Diesel, Volvo, or Mack requires expertise, specialized tools, and knowledge of the specific engine model. Here is a general overview of the process, but it is highly recommended to consult the engine manufacturer's service manual or a qualified technician for precise instructions:


  1. Disconnection: Before replacing the EGR valve, disconnect the negative battery cable to prevent any electrical issues or accidental starting of the engine.
  2. Access and Removal: Locate the EGR valve on the engine. It is typically connected to the intake manifold and the EGR cooler. Remove any necessary components obstructing access to the valve, such as air intake components or heat shields. Carefully disconnect the electrical connections, vacuum lines, and any mounting bolts or clamps securing the valve.
  3. Cleaning: Thoroughly clean the mating surfaces of the intake manifold and the EGR valve where it is installed. Remove any residue, carbon deposits, or old gasket material.
  4. Installation: Install the new EGR valve following the manufacturer's specifications and procedures. Ensure proper alignment and tightness of electrical connections, vacuum lines, and mounting bolts or clamps.
  5. Reassembly: Reassemble the engine components, ensuring proper alignment and connection of all wiring, hoses, sensors, and components removed during the disassembly process.
  6. Testing and Verification: Start the engine and carefully monitor for any abnormal engine performance, check for proper EGR valve operation, and ensure there are no vacuum leaks. Perform additional checks, such as functional tests, to verify the repair.

Please note that the exact steps and procedures can vary significantly depending on the specific engine model, manufacturer, and other factors. Always consult the appropriate service manual or seek assistance from qualified technicians for the specific engine and EGR valve you are working on.

Previous article How to inspect, diagnose and replace a water pump
Next article How to replace an EGR cooler?